Page Header

Bevel Ball Actuators BB150 (7.5 Ton)

BB150 (7.5 TON)

Joyce BB150 bevel ball actuators with a 7.5-ton static capacity, offer higher efficiency and greater speed than other mechanical screw jacks. These are among Joyce’s fastest jacks, able to attain travel speeds of 13.5 feet per minute. Available in Translating and KFTN designs, they act as miter boxes, making them an ideal choice for multi-jack systems. As many as three output shafts may be specified for mounting motors, limit switches, readout devices and other accessories.

1 1/2” diameter lifting screw
Require a brake or other external locking device to hold position
Fully predictable J-10 ball nut life expectancy
Right hand screws standard (left hand screws available)
Threaded end conditions standard (load pad, clevis, and plain end conditions available)
Protective boots and other options are available

2D/3D Drawings

Product Media

2D/3D DRAWINGS O & M MANUAL COMMON SYSTEM ARRANGEMENTS PRODUCT INFORMATION ORDERING INFORMATION TRANSLATING KFTN TYPICAL PLAN VIEW COLUMN LOAD CHART LIFE EXPECTANCY CHART

Available Models

BB150 (7.5 TON) BB225 (15 TON) BB300 (35 TON) BB400 (100 TON)

Ductile Iron housing
Alloy steel ball screw
Input shaft CDS

Model	Dynamic Capacity	Upright or Inverted Assembly: Screw-in tension	Upright or Inverted Assembly: Screw-in compression	Screw Dia./Lead	Bevel Gear Ratio	Pinion Turns for 1" Travel	Pinion Torque (Raising)	Pinion Torque (Holding)	Screw Torque	Actuator Efficiency	Base Weight (Lbs.)	Add for Each Inch of Travel (Lbs.)
BB150	Please use JAX® V2 software or contact Joyce/Dayton	15,000 lbs.	15,000 lbs.	1.50/.25	2.69:1	10.77	.022W*	.018W*	.044W*	72.2%	52	0.7

Important Note: Bevel Ball Actuators are not self-locking. Brake motors or external locking systems are required.
*W: Load in Pounds.
Pinion Torque (raising): The torque required to continuously raise a given load.
Pinion Torque (holding): The torque required to hold a given static load in position.
Screw Torque: The torque required to resist screw rotation (translating design) and traveling nut rotation (KFTN design).
Lead: The distance traveled axially in one rotation of the lifting screw.
Pitch: The distance from a point on the screw thread to a corresponding point on the next thread, measured axially.

Request A Quote

First Name

Last Name

Company

Address

Address 2

City

Country

State/Province

Zip/Postal Code

Phone

This request is for:

Locate Serial Number

Attachment

Choose file

One file only.
512 MB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.

Message

Request a quote for products and repair parts:

New Product Quote: Visit the product sections on this website and select or construct a part number and quantity of the product you wish to purchase.
Reorder a Product: Include the previous PO or serial number along with the quantity you need.
Repair Parts: View the product manual or exploded view to identify the components that are needed. Locate the product serial number and include it in your correspondence with Customer Service.

If you need us to repair your product, request a Returned Goods Authorization (RGA) number by email, phone, or simply fill out the form above and mention "RGA" in message box.

CAPTCHA

This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

By submitting this form, I agree to the Joyce/Dayton Website Usage Terms and Conditions, Privacy Policy, and that a Joyce/Dayton representative may contact me.