3.000 In. Diameter - 0.660 In. Lead

Page Header

3.000 In. Diameter - 0.660 In. Lead

3.000 In. Diameter - 0.660 In. Lead

This 3 inch diameter ball screw has a 0.660 inch lead. Corresponding standard capacity ball nuts with right-hand threads are available.

Ball screw specifications RH
Ball screw part no. BS 300 R 066 A
Nominal ball circle diameter 3.000 in.
Lead 0.660 in.
Screw diameter 2.940 in.
Root diameter 2.480 in.
Screw weight 19.43 lb./ft.
Torque to raise 1 pound* 0.117 in.-lb.
Maximum screw length 24 ft.

* Torque to raise 1 pound = 0.177 x inches lead x pounds load

Standard Capacity Ball Nut Specifications (S)

jack
Ball nut specifications RH
Ball nut part no. (standard capacity) BN  300 R 066 S
Ball nut with flange part no. BF 300 R 066 S
Dynamic load capacity** 42,000 lb.
Static load capacity 260,000 lb.
Ball nut weight 25.02 lb.
Nominal ball dia. (avg. ball qty.) 1/2 in. (177)
Flange part no. FL-4325-B
Wiper kit part no. WK-80

** for 1,000,000 inches

2D/3D Drawings

Login to access 2D/3D Drawings

Product Media

2D/3D DRAWINGS3.000" X .660" DATA SHEET SB BEARING BLOCKS AND SCREW ENDS DB BEARING BLOCKS AND SCREW ENDS FB BEARING BLOCKS AND SCREW ENDS STANDARD BALL NUT, FLANGE, WIPER KIT EFFECT OF CHANGE IN PARAMETER
jack
  • Ball screws are made from alloy steel and case hardened to Rc56 (minimum).
  • A black oxide finish is applied to prevent corrosion during shipping and for a brief storage period.
  • The rust inhibiting properties of the screw lubricant offers additional corrosion resistance.
  • Ball nut housings are steel with case hardened threads. A black oxide coating provides additional protection.
  • Flanges are constructed of steel with a black oxide coating.

Sample Part Number:

Click on the part number to reveal additional information about the screw design and shaft codes.

Thread Form

B: Ball Screw

Component

A: Assembly
S: Screw - without ball nut or bearing mounts

Screw Diameter - Thread direction - TPI (English)

Dia/TPI Code
5/8 - .200* 063 R 020
3/4 - .200 075 R 020
3/4 - .500 075 R 050
1 - .250* 100 R 025
1 - .500 100 R 050
1 - 1.000 100 R 100
1 1/2 - .500 150 R 050
1 1/2 - 1.00 150 R 100
1 1/2 - 1.875 150 R 188
2 1/4 - .500 225 R 050
2 1/2 - .500 250 R 050
3 - .660 300 R 066
4 - 1.000 400 R 100

R – Right-hand – all thread diameters/leads are available with right hand threads
L – Left-hand *- Substitute an ”L” in the part number for left hand leads

 

Screw Material

A: Alloy Steel

First End of Screw

(Flange or threaded end of nut always faces second end)

Bearing Mount Options Machining Options (choose one that corresponds to the bearing block)
SB - Simple Single* 1N – Threaded shaft only
DB - Simple Double 2K –  Thd Shaft w Kwy, 2L – Thd Shaft no Kwy, 2N – Threaded shaft only
FB - Fixed Double 3K –  Thd Shaft w Kwy, 3L – Thd Shaft no Kwy, 3N – Threaded shaft only
XX - No Bearing 4K –  Shaft w Keyway, 4L – Shaft no Keyway, 4N – Support only, XX – No Machining

(When selecting ”XX – No Bearing”, choose from mounting options 1K through 4N  or XX, above)
* All Simple Single bearing mounts are designed for radial loads only

Second End of Screw

(Flange or threaded end of nut always faces away from second end)

Bearing Mount Options Machining Options (choose one that corresponds to the bearing block)
SB - Simple Single* 1N – Threaded shaft only
DB - Simple Double 2K –  Thd Shaft w Kwy, 2L – Thd Shaft no Kwy, 2N – Threaded shaft only
FB - Fixed Double 3K –  Thd Shaft w Kwy, 3L – Thd Shaft no Kwy, 3N – Threaded shaft only
XX - No Bearing 4K –  Shaft w Keyway, 4L – Shaft no Keyway, 4N – Support only, XX – No Machining

(When selecting ”XX – No Bearing”, choose from mounting options 1K through 4N  or XX, above)
* All Simple Single bearing mounts are designed for radial loads only

Ball Nut Properties

S - Standard Capacity
H - High Capacity
U - Ultra Capacity
X - No ball nut

Other Options

F - With Flange
B - With Flange and Wipers
W - Wipers
X - No Options

Screw Length 000.00"

Enter value in inches with decimal if needed
Note that available screw length varies among screw sizes.

SB Screw End Conditions

jack

Screw Number Bearing Mount No. oS1 A1 A2 A3 A4 A5 A6 o A7 A8 A9 A10 A11
BS300R066A   2.3627 1.880 1.195 0.90 0.315 1.220 2.375 4.50 2.360-18 UNS W-12 N-12 6312
  2.3622 0.313

DB Screw End Conditions

jack

Screw Number Bearing Mount No. oS1 oS2 A1 A2 A3 A4 A5 A6 A7 A8 A9
BS300R066A   2.3627 2.250 9.22 5.54 4.832 1.220 0.063 2.360-18 UNS W-12 N-12 1/2 x 2
  2.3622 2.249

FB Screw End Conditions

jack

Screw Number Bearing Mount No. oS1 oS2 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11
BS300R066A   2.3627 2.250 11.56 8.06 7.15 6.035 1.220 3.62 0.62 2.360-18 UNS W-12 N-12 1/2 x 2
  2.3622 2.249
 
 
Request A Quote
Locate Serial Number
One file only.
512 MB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.

Request a quote for products and repair parts:

  • New Product Quote: Visit the product sections on this website and select or construct a part number and quantity of the product you wish to purchase.
  • Reorder a Product: Include the previous PO or serial number along with the quantity you need.
  • Repair Parts: View the product manual or exploded view to identify the components that are needed. Locate the product serial number and include it in your correspondence with Customer Service.

If you need us to repair your product, request a Returned Goods Authorization (RGA) number by email, phone, or simply fill out the form above and mention "RGA" in message box.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

By submitting this form, I agree to the Joyce/Dayton Website Usage Terms and Conditions, Privacy Policy, and that a Joyce/Dayton representative may contact me.