BIA51, BIA201 - Ball Screw 1" diameter, .25" lead
BIA51, BIA201 - Ball Screw 1" diameter, .25" lead
Joyce integrated actuators with ball screws (BIA) lift one ton. Requiring only electric power, Joyce integrated linear actuators may be used in place of hydraulic cylinders, eliminating the cost and potential for leaks associated with hydraulic systems. Translating tube (TT) integrated linear actuators are well suited for use in industrial environments where protection of the lifting screw mechanism and low maintenance is desired. Traveling nut (TN) integrated linear actuators are best suited for use in environments that are relatively clean and free of dust.
- Ball screw, 1” diameter, .25” lead
- Durable aluminum housing with integral NEMA 56C-face motor flange
- Optional motor size based on load capacity
- Optional limit switch and accessories
- Brake motor required to hold position
- Capable of speeds from 14 to 86 inches per minute
- For travel lengths greater than 24" contact [email protected]
Joyce offers controls for Integrated Actuators. Contact us today!
2D/3D Drawings
Login to access 2D/3D Drawings
Product Media
Available Models
- Aluminum housing and motor mount
- Input shaft (worm), 4140 cold rolled steel (CDS)
- Alloy steel ball screw
- Chrome plated inner tube
- Aluminum bronze traveling nut
Sample Part Number:
Click on the part number to reveal additional informaton about jack designs and shaft codes.
Model Number
| Acme 1" diameter, .25" pitch |
Acme 1" diameter, .25" pitch/.50" lead |
Ball 1" diameter, .25" pitch |
Ball 1" diameter, 1.00" pitch |
|---|---|---|---|
| IA51 IA201 |
DIA51* DIA201* |
BIA51* BIA201* |
BHIA51* |
Important Note: *Integrated actuators may lower under load. Brake motors or external locking systems are recommended.
Integrated Actuator Configuration
| TT Translating Tube | TN Keyed for Traveling Nut |
Integrated Actuator Rise
Rise is travel expressed in inches and not the actual tube length.
| Left Side Shaft Code | Right Side Shaft Code |
|---|---|
 |
 |
| Limit Switches | ||||
|---|---|---|---|---|
| Position | 1 | 2 | 3 | 4 |
| Left side Shaft |  |
 |
 |
 |
| Code | LJ10 | LJ20 | LJ30 | LJ40 |
| Motors | |
|---|---|
| Size | Code |
| 1/4 HP | K |
| 1/3 HP | A |
| 1/2 HP | B |
| 3/4 HP | C |
| No Motor | X |
| Standard Motors | |||||
|---|---|---|---|---|---|
| Voltage | Speed (rpm) | 1/4 HP | 1/3 HP | 1/2 HP | 3/4 HP |
| 115/230 VAC Single Phase | 1140 | X | X | ||
| 115/230 VAC Single Phase | 1725 | X | X | X | X |
| 115/230 VAC Single Phase w/brake | 1725 | X | X | X | |
| 230/460 VAC Three Phase | 1140 | X | X | X | X |
| 230/460 VAC Three Phase | 1725 | X | X | X | X |
| 230/460 VAC Three Phase w/brake | 1725 | X | X | X | X |
| 12 VDC Permanent Magnet | 1800 | X | X | X | X |
| 24 VDC Permanent Magnet | 1800 | X | X | X | |
| 90 VDC Permanent Magnet | 1750 | X | X | X | X |
| 180 VDC Permanent Magnet | 1750 | X | X | X | X |
| Options** | |
|---|---|
| X | No additional options |
| M | Modify standard actuator |
| C12 | 12 VDC motor |
| C24 | 24 VDC motor |
| C90 | 90 VDC motor |
| C180 | 180 VDC motor |
| K | Brake motor |
| R | 1140 RPM motor |
| S | Single phase 115/230 3-ph. 60 Hz |
**Specify as many options as needed.
| Optional Accessories | ||
|---|---|---|
 |
 |
 |
| 08040369 | CP-30 | 08040368 |
Jack Designs
 |
 |
 |
 |
 |
|
S=Translating |
K=Keyed for Non Rotation |
N=Traveling Nut |
D=Double Clevis |
R=KFTN Trunnion* |
* Standard trunnion mounts available on 2-ton through 20-ton jacks.
Metric Screw Jack Rise
Rise is travel expressed in inches and not the actual screw length.
| Model Number | BIA511 | HBIA51 | |||
| BIA201 | - | ||||
| Ball Screw | 1" diameter, .25" lead, ball screw | 1" diameter, 1.0" lead, ball screw | |||
| Wormgear Ratio | 5:1 | 5:1 | |||
| 20:1 | - | ||||
| Worm Shaft Turns/1" Travel | 20 | 5 | |||
| 80 | - | ||||
| Motor RPM | 1140 | 1725 | 1140 | 1725 | |
| Lifting Speed (Inches/Minute) | 57 | 86 | 228 | 345 | |
| 14 | 21 | - | - | ||
| Rated Load (Lbs.) | 1/4 HP Motor | 925 | 625 | 225 | 100 |
| 2000 | 2000 | - | - | ||
| 1/3 HP Motor | 1225 | 825 | 300 | 200 | |
| 2000 | 2000 | - | - | ||
| 1/2 HP Motor | 1850 | 1250 | 450 | 300 | |
| 2000 | 2000 | - | - | ||
| 3/4 HP Motor | 2000 | 1875 | 700 | 450 | |
| 2000 | 2000 | - | - | ||
Lead: The distance traveled axially in one rotation of the lifting screw.
Pitch: The distance from a point on a screw thread to a corresponding point on the next thread, measured axially.
Important Note: BIA & HBIA models may lower under load. Brake motors or external locking systems are recommended.